Waterco multiport valve 1.5″ roto with integrated 133mm spider gasket
£59.00
Waterco multiport valve 1.5″ roto with integrated 133mm spider gasket.
Genuine Waterco spare.
Made for 1.5″ multi port valves.
Waterco multiport valve 1.5" roto with integrated 133mm spider gasket
£59.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Waterco multiport valve 1.5" roto with integrated 133mm spider gasket
£59.00Ask a Question
Waterco multiport valve 1.5″ roto with integrated 133mm spider gasket.
Genuine Waterco spare.
Made for 1.5″ multi port valves.
Overall diameter of rotor: 143mm
Diameter of Gasket: 133mm
Related Products
Waterco/Lacron sand filter bulk union plain slip with fixing nut.
Genuine Waterco/Lacron spare.
1.5″ Bulk head union with fixing nut in black.
Pack of 2.
Waterco/Lacron threaded sweeping bend kit 1.5″.
Threaded sweeping bend kit for Lacron filter sizes: 16″/18″/24″.
What’s in the kit:
- Sweeping bend 1.5″
- Male threaded nipple 1.5″
- 2 x Nuts
- Rubber O – rings.
Waterco/Lacron sand filter bulk head 1.5″ flat gaskets.
Genuine Waterco/Lacron spare.
Flat gasket set for 1.5″ bulk head unions used to seal the multiport valve to the tank.
Pentair Triton sand filter 8.5” clear domed lid.
Genuine Pentair part.
Part number: R152500.
Pentair Triton bleed valve.
Genuine Pentair part.
Sand filter air bleed valve.
Part number – R154689
Pentair 2” spider gasket for Triton/Tagelus.
Genuine Pentair part.
Part number: RGC20E12.
Fits Triton / Tagelus sand filters.
Waterco/Lacron 8″ Filter lid with bleed valves.
New design since 2020. Fits the old standard 8″ filter lid.
Overall diameter: 8″
Pentair Triton Brass air bleed valve lid connector.
Genuine pentair part.
Sand filter air bleed valve brass connector for black bleed valve.
Part number – R154687.
Certikin filter pressure gauge 0.25″.
Genuine Certikin spare.
Part number: G3000.
For side/base entry.
Brass male BSP thread 0.25″
Certikin thermoplastic multi port valve union, nut and slip.
Genuine Certikin part.
Part number: SPTH17.
Includes o – ring for slip.
Genuine Waterco spares.
Lacron through the body complete with securing nut in black.
Size: 1.5″
This fits all the old blue Lacron filter tanks with white bulk head fittings, as well as the new filters.
Part number: W02989 / 6013
Certikin Vision top mount multi port valve o-ring.
Genuine Certikin spare.
Part number 3 in diagram.
Fits the Vision top mount sand filter sizes: 20″/24″/28″
Diameter – 6″