Waterco/Lacron threaded sweeping bend kit 1.5″
£33.99
Waterco/Lacron threaded sweeping bend kit 1.5″.
Threaded sweeping bend kit for Lacron filter sizes: 16″/18″/24″.
What’s in the kit:
- Sweeping bend 1.5″
- Male threaded nipple 1.5″
- 2 x Nuts
- Rubber O – rings.
Waterco/Lacron threaded sweeping bend kit 1.5"
£33.99Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Waterco/Lacron threaded sweeping bend kit 1.5"
£33.99Ask a Question
Waterco/Lacron threaded sweeping bend kit 1.5″.
Threaded sweeping bend kit for Lacron filter sizes: 16″/18″/24″.
Post 2004 filters.
1.5″/40mm.
What’s in the kit:
- Sweeping bend 1.5″
- Male threaded nipple 1.5″
- 2 x Nuts
- Rubber O – rings.
Related Products
Waterco/Lacron sand filter lateral 5″.
Genuine Waterco/Lacron spare.
For 20″ – 24″ sand filters.
1 in stock
Waterco/Lacron 8″ Filter lid with bleed valves.
New design since 2020. Fits the old standard 8″ filter lid.
Overall diameter: 8″
4 in stock
Genuine Lacron spares.
8″ diameter o – ring for Lacron sand filter lids.
Part number – LAC – 051 – 0532
3 in stock
Genuine Waterco spare.
2″ Bulkhead gasket for Large Lacron filters.
Flat gasket set.
1 in stock
Waterco multiport valve 1.5″ roto with integrated 133mm spider gasket.
Genuine Waterco spare.
Made for 1.5″ multi port valves.
1 in stock
Pentair Triton sand filter bottom drain assembly kit.
Genuine Pentair part.
Part number – R154696.
2 in stock
Waterco/Lacron sand filter complete drain plug assembly.
Genuine Waterco/Lacron spare.
Part number: 620960015.
Diameter size: 15mm.
Overall length: 10cm.
5 in stock
Certikin filter pressure gauge 0.25″.
Genuine Certikin spare.
Part number: G3000.
For side/base entry.
Brass male BSP thread 0.25″
3 in stock
Pentair Triton bleed valve.
Genuine Pentair part.
Sand filter air bleed valve.
Part number – R154689
2 in stock
Pentair multi port valve spider gasket for 1.5” valve.
Genuine Pentair product.
Product code RGB10E12.
Overall diameter of spider gasket 133mm.
5 spoke spider gasket.
1 in stock
Certikin thermoplastic multi port valve union, nut and slip.
Genuine Certikin part.
Part number: SPTH17.
Includes o – ring for slip.
1 in stock
Pentair o – rings for multi port stem selector.
Genuine Pentair part.
2 x O – rings in pack.
2 in stock