Swimming pool pipe mate – 1.5″
£2.00
Swimming pool pipe mate – 1.5″.
Designed to fit into old piece of pipe that are cut flush with old fittings, then glued into new fittings.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
Swimming pool pipe mate - 1.5"
£2.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Swimming pool pipe mate - 1.5"
£2.00Ask a Question
Swimming pool pipe mate – 1.5″.
Designed to fit into old piece of pipe that are cut flush with old fittings, then glued into new fittings.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
Related Products
Swimming pool plain reducer 2″ – 1.5″
Made from high quality ABS class C plastic.
This fitting is designed to reduce 2″ pipe fittings down to 1.5″ ABS pipe. Or to increase 1.5″ pipe to fit 2″ fittings.
16 in stock
Swimming pool union male thread 1.5″
Made from high quality ABS class C plastic.
This fitting is made to join 1.5″ pipe to 1.5″ female threads commonly found on filters, heaters and pumps. It also allows you to disconnect pipe without having to cut the pump, making it easier to remove your hardware e.g: Pump, filter and heater if they need repairing or replacing.
20 in stock
Swimming pool threaded reducer 2″ – 1.5″
Made from high quality ABS class C plastic.
This fitting is designed to join threaded pieces to reduced or increased pipe sizes. Used commonly on main drain pots and on some pumps.
31 in stock
1.5” male threaded hose tail for 32mm – 38mm pipe with o – ring.
Made from high quality ABS plastic.
Includes o – ring at the top of the thread to ensure a water tight seal without the need of PTFE tape or silicone.
The ribbed plastic helps ensure the flexi pipe wont disconnect when under pressure
5 in stock
Swimming Pool Double Union Ball Valves – CH – 1.5″ Pipe Size.
Ideal for all in ground & above ground pipe work installations as they offer the very best in water control valves.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
1 in stock
Rotabond 2000 290ml – Black
A high quality, single component MS – polymer underwater sealant.
Environmentally friendly
Can also be applied on wet surfaces, even underwater.
Odourless and fast curing.
Stays permanently flexible.
3 in stock
2″ Male thread union.
Made from high quality ABS class C plastic.
This fitting is designed and ideal to be used to connect pipe to threads found on pumps, filters and heaters whilst also allowing the flexibility to undo the large union nut and separate the pipe without having to cut the pipe.
4 in stock
Swimming Pool Socket Nipple – 1.5″.
Designed to thread into various BSP threads, to generally be used with P.T.F.E. tape.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
20 in stock
Swimming Pool Nipple – 1.5″.
Designed to thread into various BSP threads, to generally be used with P.T.F.E. tape.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
20 in stock
Swimming Pool Tee Piece – 1.5″
Designed to joint three lengths of pipe together in a solvent welded join.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
24 in stock
1.5” Female threaded socket ABS.
Made from high quality ABS plastic.
This is a female threaded socket, so can be used to connect onto a 1.5” male thread and have 1.5” pipe glued into the other side.
50 in stock
Swimming pool pipe end cap 1.5”
Swimming pool pipe end cap 1.5” are made from 100% ABS.
This fitting is designed to glue onto a 1.5” pipe to cap off the pipe.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
16 in stock