RotaBond 2000 290ml – White
£25.00
RotaBond 2000 290ml – White
A high performance, one component, MS-Polymer underwater adhesive and sealant.
Outstanding primer-less adhesive to virtually all surfaces.
Can also be applied on wet surfaces, even underwater.
RotaBond 2000 290ml – White
£25.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
RotaBond 2000 290ml – White
£25.00Ask a Question
RotaBond 2000 290ml – White
A high performance, one component, MS-Polymer underwater adhesive and sealant.
Outstanding primer-less adhesive to virtually all surfaces.
Can also be applied on wet surfaces, even underwater.
Excellent UV resistance.
* Solvent and Isocyanate free – Environmentally friendly
* Outstanding primer-less adhesive to virtually all surfaces
* Can also be applied on wet surfaces, even underwater.
* Odourless and fast curing
* Stays permanently flexible
Related Products
ACTI Spa Hot Tub pH Plus 1KG
Genuine ACTI product
ActiSpa Hot Tub pH Plus is a specially formulated product designed to address the pH balance of your hot tub’s water. This product plays a crucial role in ensuring a comfortable and safe hot tub experience while also maintaining water quality.
Key Features:
- pH Adjustment: ActiSpa Hot Tub pH Plus is specifically designed to increase the pH level of the water in your hot tub. This is important because the pH of the water can naturally shift over time and with regular use.
Benefits of Using ActiSpa Hot Tub pH Plus:
- Bather Comfort: Maintaining the correct pH level is essential for the comfort of hot tub users. Water that is too acidic or too alkaline can cause skin and eye irritation, making the hot tub experience less enjoyable.
- Water Quality: Proper pH balance is fundamental for maintaining water quality. It helps prevent potential issues such as corrosion of hot tub components, scaling on surfaces, and the proliferation of bacteria and algae in the water.
- Effective Sanitisation: Maintaining the ideal pH level is crucial for the effectiveness of water treatment chemicals, such as chlorine or bromine. These chemicals work most efficiently within a specific pH range to effectively sanitise the water and maintain its clarity.
- Equipment Protection: Keeping the pH within the recommended range is also essential for safeguarding the hot tub’s equipment and components. When the pH is too low (acidic) or too high (alkaline), it can lead to damage and reduced equipment lifespan.
Using ActiSpa Hot Tub pH Plus provides a convenient and reliable solution for adjusting and increasing the pH level in your hot tub water. This product ensures that your hot tub water remains comfortable, safe, and of the highest quality, enhancing the overall hot tub experience for you and your guests. Proper pH management is a fundamental aspect of hot tub maintenance and water chemistry control, and ActiSpa Hot Tub pH Plus makes this task simple and effective.
3 in stock
Rotabond 2000 290ml – Black
A high quality, single component MS – polymer underwater sealant.
Environmentally friendly
Can also be applied on wet surfaces, even underwater.
Odourless and fast curing.
Stays permanently flexible.
3 in stock
Lo-Chlor Starver X Phosphate Remover – 1 litre
Genuine Lo-Chlor product
Lo-Chlor Starver X Concentrated Phosphate Remover is a product designed for swimming pools to effectively and safely remove high levels of phosphates. Here are some key details about this product:
- Phosphate Removal: Starver X is a potent phosphate remover that can eliminate high levels of phosphates from swimming pool water. One liter of Starver X can remove up to 6000 parts per billion (ppb) or 6 parts per million (ppm) of phosphates from a 50,000-liter pool.
- Curative Solution: It is specifically designed to address and cure pools with elevated phosphate levels. High phosphate levels can contribute to problems such as algae growth, reduced water clarity, and potential maintenance issues.
Starver X can help improve water quality and reduce the risk of various pool issues associated with elevated phosphate levels. It’s important to follow the manufacturer’s recommended usage instructions for the best results in phosphate removal and pool maintenance.
7 in stock
Blue Horizons Chlorine Reducer – 1KG
Genuine Blue Horizons product
The Blue Horizons Chlorine or Bromine Neutralizer is a product designed to completely remove chlorine or bromine from a swimming pool. Here are the application instructions for using this product:
Application Instructions:
- Pre-dissolve the Product: Start by pre-dissolving the product in a clean plastic container. The maximum rate is 100 grams of the product per 10 liters (2.2 gallons) of clean, warm water. Stir the mixture well to ensure that the product is fully dissolved.
- Adding to the Pool: Carefully add the resulting solution to the pool while the pump(s) are turned “on.” It’s preferable to add it near the water inlets to aid in even distribution.
- After Shock Treatment: If you are applying the Chlorine or Bromine Neutralizer after a shock treatment, it’s recommended to allow a minimum of 8 hours for the shock chlorination to oxidize swimmer wastes from the water before applying the neutralizer.
- Measure and Calculate: Measure the free chlorine or total bromine level in the water. Then, using the dosing table provided, calculate the total amount of neutralizer required.
- Split Doses: Split the total amount calculated in step 4 into 4 smaller doses. Apply each 1/4 dose, allowing time for thorough circulation. For commercial pools, allow 2-3 hours for circulation, and for domestic pools, allow 6-8 hours for circulation.
- Re-Testing and Further Dosing: After each dose has circulated, re-test the chlorine or bromine level in the water. If necessary, add further doses as required to achieve the desired level of chlorine or bromine removal.
3 in stock
Certikin skimmer frame, lid and screws.
Genuine Certikin spare.
Certikin part number: HD100(SN)
Lo-Chlor Starver Phosphate Remover – 2.5ltr
Genuine Lo-Chlor product
Starver® removes phosphate which is THE major food source for algae in pool water. Starver® is most effective when treating phosphate levels below 2ppm (2000 ppb). For higher levels use Lo-Chlor Starver® X.
All products we sell are high quality and come from trusted manufacturers. The majority of our products are ready to be posted and in stock. Our webstore offers a vast selection of high-quality products, including pumps, filters, heaters, maintenance equipment, spares and much more. We carefully select only the best products to ensure that you have access to the highest quality items on the market. This is our family-run webstore, with over 75 years of combined experience. We are dedicated to providing you with the best products and services in the swimming pool and hot tub industry. We pride ourselves on our extensive knowledge and expertise, and we’re always happy to share it with our customers. Thank you for choosing our webstore as your go-to source for all swimming pool and hot tub needs. We look forward to helping you maintain your pool or hot tub for years to come!
If you have any questions about parts or knowledge, please contact us.
3 in stock
Lo-Chlor Multi Stain Remover – 1KG
Genuine Lo-Chlor product
What Is It?
Lo-Chlor Multi Stain Remover is a versatile stain remover designed to address a range of problem stains in swimming pools, including iron, copper, manganese, tannin, cobalt (black staining on fiberglass pools), and rust from pool floors and walls.
Who Needs It?
Any pool owner who is dealing with staining issues in their pool.
What Does It Do?
Multi Stain Remover can be used to remove iron, copper, and manganese stains from all pool surfaces. It is also effective in eliminating most scale deposits.
Advantages Over Other Similar Products:
- Easy and economical to use.
- Suitable for all types of pool finishes.
- Functions as a general-purpose stain treatment.
1 in stock
Lo-Chlor 500ml Instant Filter Cleaner
Genuine Lo-Chlor product
Lo-Chlor Instant Filter Cleaner in a 500ml bottle is specially formulated for the regular maintenance of pool and spa cartridge filters.
This product offers several advantages:
- Regular Filter Maintenance: Lo-Chlor Instant Filter Cleaner is intended for routine cleaning of cartridge filters used in both swimming pools and hot tubs. Regular maintenance of the filter is essential to ensure efficient filtration and water clarity.
- Unique Formula: What makes this product unique is its formula, specifically designed to target and eliminate body fats, oils, and dirt that accumulate on cartridge filters. These contaminants can lead to reduced filter efficiency and compromised water quality.
- No Soaking Required: Unlike some other filter cleaning products that necessitate soaking the filters in a solution for an extended period, Lo-Chlor Instant Filter Cleaner streamlines the process. It allows you to clean the filters without the need for a soaking step, making maintenance more convenient and efficient.
3 in stock
Lo-Chlor Liquid Pool Blanket – 1L
Genuine Lo-Chlor product
Lo-Chlor Liquid Pool Blanket is a product designed to reduce water evaporation and heat loss from the pool by forming a protective layer on the water’s surface. Here are some key points about this product:
Product Description:
- Purpose: Liquid Pool Blanket is used to create a protective layer on the surface of pool water, which helps reduce water evaporation and heat loss to the atmosphere.
- Compatibility: This product is compatible with all pool chemicals, making it a versatile addition to your pool maintenance routine. It is also noted for having minimal impact on the pH of the pool water.
- Usage: A 1-liter bottle of Liquid Pool Blanket is designed to provide approximately 4 months of treatment for a 50,000-liter pool. The duration of effectiveness may vary depending on factors such as pool size, environmental conditions, and usage patterns.
Liquid Pool Blanket is a convenient way to help maintain pool water levels and temperature, reduce water and energy consumption, and potentially extend the swimming season by minimizing heat loss. It is important to follow the manufacturer’s instructions for proper and effective application of this product.
5 in stock
ACTI 5 5KG Multifunctional Chlorine Granules Stabilised
Genuine ACTI Product
These granules provide an easy way to maintain chlorine levels in your swimming pool. They are specially formulated to prevent bacteria growth, discourage algae, provide continuous clarification, stabilise against chlorine loss to sunlight and reduce amount of chlorine consumed.
2 in stock
Cascade aqua genie oriface return grill HG110.
Genuine Cascade part.
Cascade part number: HG110.
Rectangle oriface water return grill.
3 in stock
Easy fix waterproof under water repair tape – black.
Supplied by Certikin.
Roll dimensions: 1.5m long x 100mm wide.
This tape has many applications. It’s perfect for pool liners, pond liners, plastic pipe leaks, metal pipe leaks, filter tanks, water butts and any water storage tanks.
This product provides a very strong, tough adhesion to all flat surfaces.
Offers a quick easy application.
4 in stock