Premium 1.5HP Hayward Super Swimming Pool Pump
£579.00
Premium 1.5HP Hayward Super Swimming Pool Pump
The Premium 1.5HP Hayward Super Swimming Pool Pump offers high performance and energy efficiency, designed for larger domestic pools. With a powerful motor and quiet operation, this pump ensures reliable and consistent water circulation. Easy to install and built to last, it’s perfect for pools requiring higher flow rates.
Key Features:
-
High Flow Rate – 13m³/h for powerful circulation
-
Energy Efficient – Reduced running costs while maintaining performance
-
Quiet Operation – Low-noise design for residential settings
-
Durable Construction – Designed to withstand pool chemicals and light saline conditions
-
Simple Installation – 2″ connections, easy to install with standard plumbing fittings
Premium 1.5HP Hayward Super Swimming Pool Pump
The Premium 1.5HP Hayward Super Swimming Pool Pump offers a powerful and energy-efficient solution for circulating pool water with ease. Built with Hayward’s renowned quality and performance, this single-phase pump is ideal for domestic pools that require strong, consistent flow without high running costs.
Whether replacing an older model or installing a new system, the Premium 1.5HP Hayward Super Swimming Pool Pump delivers quiet operation, robust build quality, and a motor engineered for long-term use.
Key Features – Premium 1.5HP Hayward Super Swimming Pool Pump:
-
Energy-Efficient Design – Powerful performance while keeping electricity use under control.
-
Quiet Operation – Designed for smooth, low-noise running, perfect for residential settings.
-
Chemical-Resistant Build – Durable against standard pool chemicals and light saline conditions.
-
Heavy-Duty Motor – High-output motor built for durability and consistent circulation.
-
Simple Installation – Compatible with standard plumbing fittings and unions.
Technical Specifications:
-
Flow Rate: 13m³/h
-
Head Height: Up to 13.5 m
-
Power Supply: Single Phase (50 Hz)
-
Power Rating: 1.1 kW (1.5HP)
-
Max Pressure: 2 bar
-
Water Temperature Range: 0°C to 40°C
Pipe Sizing and Installation Considerations:
The Premium 1.5HP Hayward Super Swimming Pool Pump is designed with a 2″ connection for optimal flow and pressure efficiency. While you can reduce the pipe size from 2″ to 1.5″ using a reducer (which we have in stock), be aware that this may slightly reduce the flow rate and increase pressure. This is typically fine for short pipe runs with minimal bends, but for the best performance, maintaining a 2″ pipe throughout is recommended.
Installation Info:
-
Thread Size: 2″ female parallel thread (horizontal intake and vertical discharge)
-
Connection Tip: Use PTFE tape or a suitable sealant on all male-threaded fittings
-
Mounting Tip: We recommend anti-vibration pads to reduce sound and protect your setup
Power Conversion Chart:
| Kilowatts (kW) | Horse Power (HP) |
|---|---|
| 0.55 kW | 0.75 HP |
| 0.75 kW | 1.0 HP |
| 1.12 kW | 1.5 HP |
| 1.5 kW | 2.0 HP |
Pump Flow & Filter Size Guide for Swimming Pools:
| Pump Size (Horsepower) | Recommended Filter Size (Diameter) |
|---|---|
| 0.75 HP | 18″ – 24″ |
| 1 HP | 24″ or larger |
| 1.5 HP | 24″ – 30″ |
| 2 HP | 30″ |
Warranty & Important Information:
The Premium 1.5HP Hayward Super Swimming Pool Pump is backed by a strong manufacturer warranty to give you peace of mind:
-
2-Year Warranty – Covers the pump wet end
-
2-Year Warranty – Covers the pump motor
-
1-Year Warranty – Covers the mechanical shaft seal
Please Note:
-
All pumps are factory wet tested, so a small amount of water may be present inside the pump upon delivery. This is completely normal and part of the quality control process.
-
Do not run the pump dry. Operating the pump without water will damage the shaft seal and void the warranty.
-
The warranty does not cover damage caused by poor water chemistry or sand/grit ingress into the seals.
















