Pentair triton akita sand filter dome lid 6 inch pre 1991 R154559
£150.00
Pentair triton akita sand filter dome lid 6″ pre 1991 R154559.
Genuine Pentair spare part.
Pentair product code R154559.
Certikin part number FC4678/A.
This lid has a centre hole a the top of the filter for the fitting of a air bleed valve. The overall dimensions of this product are:
- Thread to thread: 6″
- Overall height: 165mm

Pentair triton akita sand filter dome lid 6 inch pre 1991 R154559
£150.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question

Pentair triton akita sand filter dome lid 6 inch pre 1991 R154559
£150.00Ask a Question
Pentair triton akita sand filter dome lid 6″ pre 1991 R154559.
Genuine Pentair spare part.
Pentair product code R154559.
Certikin part number FC4678/A.
This lid has a centre hole a the top of the filter for the fitting of a air bleed valve. The overall dimensions of this product are:
- Thread to thread: 6″
- Overall height: 165mm
All products we sell are high quality and come from trusted manufacturers. The majority of our products are ready to be posted and in stock. Our webstore offers a vast selection of high-quality products, including pumps, filters, heaters, maintenance equipment, spares and much more. We carefully select only the best products to ensure that you have access to the highest quality items on the market. This is our family-run webstore, with over 75 years of combined experience. We are dedicated to providing you with the best products and services in the swimming pool and hot tub industry. We pride ourselves on our extensive knowledge and expertise, and we’re always happy to share it with our customers. Thank you for choosing our webstore as your go-to source for all swimming pool and hot tub needs. We look forward to helping you maintain your pool or hot tub for years to come!
If you have any questions about parts or knowledge, please contact us.
Any trade customers we can sort out discounts and can sell at trade prices.
Related Products
Genuine Pentair Triton Sand Filter Complete Air Bleed Valve R154689/R15468
The Genuine Pentair Triton Sand Filter Complete Air Bleed Valve R154689/R15468 is a durable, direct-fit replacement designed to release trapped air safely from your Pentair Triton sand filter. Built with a strong plastic valve body and brass fixing, this 100mm assembly ensures reliable sealing and consistent filtration performance.
-
Genuine Pentair replacement part
-
Suitable for Triton sand filters
-
Plastic valve body with brass fixing
-
100mm overall length
-
Helps maintain safe, efficient filtration
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
2 in stock
Genuine Waterco/Lacron sand filter lateral 5 inch
Keep your pool filtration system running efficiently with the Genuine Waterco/Lacron Sand Filter Lateral 5 Inch, designed for 20–24 inch sand filters. This high-quality replacement lateral features a 1 inch thread and durable, chemical-resistant construction to ensure correct water flow, proper sand retention, and long-lasting filter performance.
• Genuine Waterco/Lacron 5 inch sand filter lateral
• Suitable for 20–24 inch Waterco/Lacron sand filters
• 1 inch threaded fitting
• Supports correct water flow and prevents sand returning to the pool
• Durable, chemical-resistant construction for long service life
All products we sell are high quality and come from trusted manufacturers. If you have any questions, please call our shop on 01268 776690.
1 in stock
Genuine Waterco 1.5 Inch Multiport Valve Rotor with Integrated 133mm Spider Gasket
A genuine Waterco 1.5 inch multiport valve rotor complete with an integrated 133mm spider gasket. Designed as an exact factory replacement for Waterco 1.5 inch multiport valves, this rotor restores correct sealing, smooth valve movement, and prevents internal leaks or water bypass to waste. Manufactured from durable, chemical-resistant materials for long-lasting performance.
• Genuine Waterco 1.5 inch multiport valve rotor
• Integrated 133mm spider gasket
• Restores proper internal sealing and valve alignment
• Prevents leaks and water bypass to waste
• Direct replacement spare for Waterco 1.5 inch multiport valves
2 in stock
Genuine Certikin Filter Pressure Gauge 0.25 Inch
Ensure accurate pressure monitoring of your pool filter with the Genuine Certikin Filter Pressure Gauge 0.25 Inch. Designed for side or base entry, this genuine brass gauge provides reliable readings to protect your filtration system and maintain clean, clear, and efficiently circulated pool water. Suitable for a wide range of Certikin filters, it offers durable performance and simple installation.
Key Features:
-
Genuine Certikin spare – Filter Pressure Gauge 0.25 Inch
-
Brass male BSP thread 0.25 Inch for secure fitting
-
Side or base entry connection
-
Diameter: 55mm, Height: 73mm
-
Durable, long-lasting construction
-
Ensures correct filter pressure and protects equipment
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help.
Thank you for choosing CrystalClear Leisure.
2 in stock
Genuine Midas 2 inch multiport spider gasket
Keep your Midas multiport valve operating efficiently with the Genuine Midas 2 Inch Multiport Spider Gasket. Made from high-quality, chemical-resistant material, this 5-spoke gasket ensures a secure, leak-free seal for smooth water flow. Fits 2” multiport valves with an overall diameter of 180mm.
Key Points:
-
Genuine Midas replacement part
-
5-spoke design for stable, accurate alignment
-
Durable, chemical-resistant material for long-lasting use
-
Overall diameter: 180mm
-
Easy installation: remove old gasket completely and use a small amount of silicone to secure the new gasket
-
Ensures proper valve operation and prevents leaks
4 in stock
Waterco/Lacron 8 inch Filter Lid with Bleed Valves
Waterco/Lacron 8 Inch Filter Lid with Bleed Valves is a genuine replacement lid for standard 8 inch filter housings. Equipped with two 1/4 inch air bleed valves, it allows quick and easy release of trapped air, ensuring optimal filtration performance. Durable, easy to install, and designed with the improved 2020 design for reliable pool operation.
-
Fits standard 8 inch filter housings
-
Two 1/4 inch air bleed release valves
-
Quick and safe air release
-
Durable construction
-
Easy replacement for older lids
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
1 in stock
Genuine Lacron 8 inch Filter lid tool
Genuine Lacron 8 Inch Filter Lid Tool – heavy-duty steel tool for safely removing and tightening both new and old 8 Inch Lacron sand filter lids. Provides excellent leverage, prevents damage, and makes maintenance quick and easy. Perfect for sand changes, inspections, and routine pool servicing.
• Fits new & old 8 Inch Lacron sand filter lids
• Heavy-duty steel construction for strength & durability
• Easy lid removal & tightening
• Ideal for routine pool maintenance & sand changes
• Compatible with domestic and commercial pools
• Check O-rings and re-lubricate with Genuine Magic Lube II during maintenance
1 in stock
Genuine Pentair top diffuser arm for TR100 Triton/Akita
Maintain optimal filtration performance in your 30 inch Akita, Triton, or Triton Clear Pro sand filter with the Genuine Pentair Top Diffuser Arm for TR100 Triton/Akita. This genuine Pentair spare ensures even water distribution over the sand bed, supporting efficient filtration and clean, clear pool water. Ideal for replacing worn or damaged diffuser arms, it guarantees a perfect fit and long-lasting durability.
Key Features:
-
Genuine Pentair top diffuser arm for TR100 Triton/Akita
-
Compatible with 30 inch Akita, Triton, and Triton Clear Pro filters
-
Product code: G-30-3006
-
Distributes water evenly over the sand bed for optimal filtration
-
Durable, high-quality construction for long-lasting performance
-
Essential replacement for maintaining efficient filter operation
1 in stock
Waterco/Lacron sand filter bulk union plain slip with fixing nut
Waterco/Lacron Sand Filter Bulk Union Plain Slip with Fixing Nut is a genuine 1.5 inch bulk head union supplied in black with fixing nuts included. Sold as a pack of 2, these plain slip unions provide a secure, watertight connection for reliable sand filter installation and maintenance.
-
Genuine Waterco/Lacron spare
-
1.5 inch bulk head plain slip union
-
Includes fixing nuts
-
Supplied as a pack of 2
-
Durable, leak-resistant construction
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
2 in stock
Genuine Pentair Multi Port Valve Spider Gasket for 1.5inch Valve
The Genuine Pentair Multi Port Valve Spider Gasket for 1.5inch Valve is a genuine Pentair replacement part designed to restore proper sealing and operation of your multiport valve. This 5-spoke spider gasket fits Pentair Triton, Tagelus, Azur, and Onga sand filters with 1.5-inch valves, helping to prevent internal leaks and water loss through the waste line while maintaining efficient filtration performance.
-
Genuine Pentair replacement part
-
Part number: RGB10E12
-
Designed for 1.5 inch multiport valves
-
5-spoke spider gasket for correct water flow separation
-
Fits Pentair Triton, Tagelus, Azur, and Onga sand filters (19″–24″)
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
Out of stock
Genuine Pentair 2 Inch spider gasket for Triton/Tagelus
Ensure your Pentair Triton or Tagelus sand filter operates efficiently with the Genuine Pentair 2 Inch Spider Gasket RGC20E12. This high-quality 5-spoke gasket provides a secure, leak-free seal inside your multiport valve, maintaining correct water flow and system pressure for optimal filtration. Manufactured from durable, chemical-resistant material, it delivers long-lasting performance and reliable operation across all valve positions. Always double-check gasket size before ordering to ensure compatibility.
Key Features
-
Genuine Pentair 2 Inch Spider Gasket – RGC20E12
-
5-spoke design for precise alignment
-
Chemical-resistant, durable material
-
Overall diameter: 173mm, centre hole: 18mm
-
Fits Pentair Triton and Tagelus sand filters
-
Ensures smooth operation and leak-free sealing
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help.
Thank you for choosing CrystalClear Leisure.
2 in stock
Lacron sand filter water diffuser rose distributor
Lacron Sand Filter Water Diffuser Rose Diffuser is a genuine Waterco/Lacron spare designed to evenly distribute water across the filter media for improved filtration and reduced system pressure. With a top diameter of 190mm and bottom diameter of 50mm, this internal diffuser fits on top of the upper assembly pipe to ensure balanced water flow and efficient sand filter performance.
-
Genuine Waterco/Lacron spare
-
Part number: W02066
-
Top diameter: 190mm
-
Bottom diameter: 50mm
-
Improves water distribution and reduces pressure
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
Out of stock























