Lo-Chlor Multi Stain Remover – 1KG
£25.00
Lo-Chlor Multi Stain Remover – 1KG
Genuine Lo-Chlor product
What Is It?
Lo-Chlor Multi Stain Remover is a versatile stain remover designed to address a range of problem stains in swimming pools, including iron, copper, manganese, tannin, cobalt (black staining on fiberglass pools), and rust from pool floors and walls.
Who Needs It?
Any pool owner who is dealing with staining issues in their pool.
What Does It Do?
Multi Stain Remover can be used to remove iron, copper, and manganese stains from all pool surfaces. It is also effective in eliminating most scale deposits.
Advantages Over Other Similar Products:
- Easy and economical to use.
- Suitable for all types of pool finishes.
- Functions as a general-purpose stain treatment.
What Is It?
Lo-Chlor Multi Stain Remover is a versatile stain remover designed to address a range of problem stains in swimming pools, including iron, copper, manganese, tannin, cobalt (black staining on fiberglass pools), and rust from pool floors and walls.
Who Needs It?
Any pool owner who is dealing with staining issues in their pool.
What Does It Do?
Multi Stain Remover can be used to remove iron, copper, and manganese stains from all pool surfaces. It is also effective in eliminating most scale deposits.
Advantages Over Other Similar Products:
- Easy and economical to use.
- Suitable for all types of pool finishes.
- Functions as a general-purpose stain treatment.
Professional Tips:
- Ensure the chlorine level is at 0 ppm before using the product.
- Adjust the pool’s pH to a range between 7.2 and 7.6 for best results.
- Add the product as close as possible to the stained area for optimal effectiveness.
- Do not let the product come into contact with colored marble pool finishes. In such cases, place the product in a sock or stocking attached to a pool brush and hold it very close to the affected area without direct contact.
- For spot stains, the above method is often sufficient for removal.
- For widespread staining, distribute the product evenly over the pool surface; do not add it via the skimmer basket or filter.
- To prevent re-staining, add Lo-Chlor No More Metal immediately after using Multi Stain Remover and continue adding it at regular intervals.
- Note that both pH and Total Alkalinity may be reduced when using Multi Stain Remover, so be cautious when re-balancing the pool water.
- If the water becomes cloudy after stain removal, you can use Lo-Chlor Miraclear Liquid Pool Clarifier or a Miraclear Cube in combination with regular filtration.
All products we sell are high quality and come from trusted manufacturers. The majority of our products are ready to be posted and in stock. Our webstore offers a vast selection of high-quality products, including pumps, filters, heaters, maintenance equipment, spares and much more. We carefully select only the best products to ensure that you have access to the highest quality items on the market. This is our family-run webstore, with over 75 years of combined experience. We are dedicated to providing you with the best products and services in the swimming pool and hot tub industry. We pride ourselves on our extensive knowledge and expertise, and we’re always happy to share it with our customers. Thank you for choosing our webstore as your go-to source for all swimming pool and hot tub needs. We look forward to helping you maintain your pool or hot tub for years to come!
If you have any questions about parts or knowledge, please contact us.
Related Products
Aquasparkle 1KG Multi Functional Chlorine Tablets
Genuine Aquasparkle product
Aquasparkle Multifunctional Mini 20g Chlorine Tablets are designed for maintaining water quality in hot tubs, spas, and above-ground pools. Here’s a breakdown of their use and application instructions:
Ideal Water Levels:
- Prior to using these tablets, it’s important to adjust the pH levels of your water to the ideal range of 7.2 – 7.6. This helps ensure bather comfort, protects spa equipment, and promotes the effective use of chemicals.
Tablet Features:
- These tablets slowly erode over 3-5 days, depending on factors such as temperature and water flow. Because they release chlorine slowly, it may be necessary to shock dose or oxidize the water before their use to establish chlorine more rapidly.
- Ideal chlorine levels should be between 1-3 mg/l (ppm) for pools and 3-5 mg/l (ppm) for spas, as measured by a test kit or test strips.
- These tablets are multifunctional, containing a built-in clarifier and algaecide to help maintain clear and clean water.
5 in stock
Genuine Hayward Water Inlet Front Plate With Adjustable Directional Eyeball SP1419DE19
Enhance your pool system with the Genuine Hayward White Water Return Inlet.
- 1.5″ Male Thread: Ensures compatibility with standard pool fittings.
- Adjustable Directional Eyeball: Allows precise control of water flow direction.
- Durable Construction: Built to withstand harsh pool environments.
- Part Number: SP1419DE
- Dimensions:
- Outside Diameter of Male Thread: Approximately 43 mm
- Depth of Male Thread: 25 mm
- Overall Diameter of Front Plate: 95 mm
How to Use:
- Install the Inlet:
- Ensure proper threading and sealant application.
- Attach to the pool’s return line fitting.
- Adjust the Directional Eyeball:
- Rotate the eyeball to direct water flow as desired.
- Secure in Place:
- Tighten the inlet securely to prevent leaks.
Enjoy enhanced water circulation and filtration with this easy-to-install, high-quality pool component.
1 in stock
ACTI 5 1KG Multifunctional Chlorine Tablets
Genuine ACTI product
ACTI Multifunctional Mini 20g Chlorine Tablets are designed for maintaining water quality in hot tubs, spas, and above-ground pools. Here’s a breakdown of their use and application instructions:
Ideal Water Levels:
- Prior to using these tablets, it’s important to adjust the pH levels of your water to the ideal range of 7.2 – 7.6. This helps ensure bather comfort, protects spa equipment, and promotes the effective use of chemicals.
Tablet Features:
- These tablets slowly erode over 3-5 days, depending on factors such as temperature and water flow. Because they release chlorine slowly, it may be necessary to shock dose or oxidize the water before their use to establish chlorine more rapidly.
- Ideal chlorine levels should be between 1-3 mg/l (ppm) for pools and 3-5 mg/l (ppm) for spas, as measured by a test kit or test strips.
- These tablets are multifunctional, containing a built-in clarifier and algaecide to help maintain clear and clean water.
1 in stock
RotaBond 2000 290ml – White
A high performance, one component, MS-Polymer underwater adhesive and sealant.
Outstanding primer-less adhesive to virtually all surfaces.
Can also be applied on wet surfaces, even underwater.
9 in stock
Blue Horizons Chlorine Reducer – 1KG
Genuine Blue Horizons product
The Blue Horizons Chlorine or Bromine Neutralizer is a product designed to completely remove chlorine or bromine from a swimming pool. Here are the application instructions for using this product:
Application Instructions:
- Pre-dissolve the Product: Start by pre-dissolving the product in a clean plastic container. The maximum rate is 100 grams of the product per 10 liters (2.2 gallons) of clean, warm water. Stir the mixture well to ensure that the product is fully dissolved.
- Adding to the Pool: Carefully add the resulting solution to the pool while the pump(s) are turned “on.” It’s preferable to add it near the water inlets to aid in even distribution.
- After Shock Treatment: If you are applying the Chlorine or Bromine Neutralizer after a shock treatment, it’s recommended to allow a minimum of 8 hours for the shock chlorination to oxidize swimmer wastes from the water before applying the neutralizer.
- Measure and Calculate: Measure the free chlorine or total bromine level in the water. Then, using the dosing table provided, calculate the total amount of neutralizer required.
- Split Doses: Split the total amount calculated in step 4 into 4 smaller doses. Apply each 1/4 dose, allowing time for thorough circulation. For commercial pools, allow 2-3 hours for circulation, and for domestic pools, allow 6-8 hours for circulation.
- Re-Testing and Further Dosing: After each dose has circulated, re-test the chlorine or bromine level in the water. If necessary, add further doses as required to achieve the desired level of chlorine or bromine removal.
3 in stock
Lo-Chlor Starver X Phosphate Remover – 1 litre
Genuine Lo-Chlor product
Lo-Chlor Starver X Concentrated Phosphate Remover is a product designed for swimming pools to effectively and safely remove high levels of phosphates. Here are some key details about this product:
- Phosphate Removal: Starver X is a potent phosphate remover that can eliminate high levels of phosphates from swimming pool water. One liter of Starver X can remove up to 6000 parts per billion (ppb) or 6 parts per million (ppm) of phosphates from a 50,000-liter pool.
- Curative Solution: It is specifically designed to address and cure pools with elevated phosphate levels. High phosphate levels can contribute to problems such as algae growth, reduced water clarity, and potential maintenance issues.
Starver X can help improve water quality and reduce the risk of various pool issues associated with elevated phosphate levels. It’s important to follow the manufacturer’s recommended usage instructions for the best results in phosphate removal and pool maintenance.
7 in stock
ACTI 5 5KG Multifunctional Chlorine Granules Stabilised
Genuine ACTI Product
These granules provide an easy way to maintain chlorine levels in your swimming pool. They are specially formulated to prevent bacteria growth, discourage algae, provide continuous clarification, stabilise against chlorine loss to sunlight and reduce amount of chlorine consumed.
2 in stock
Genuine 1 HP Sta Rite Swimming Pool Pump 5P2R
Enhance your pool’s performance with the Genuine Pentair Sta-Rite 5P2R swimming pool pump. Featuring a powerful 1 hp / 0.75 kW motor, this pump ensures efficient water circulation and quiet operation. Ideal for in-ground pools, it’s built with a reinforced thermoplastic wet end and includes a quick-release strainer basket for easy maintenance. Backed by a comprehensive warranty, it’s CE-Approved and designed for durability and reliability. For detailed specifications, refer to the full product description.
2 in stock
Genuine Certikin Flexivac Concrete/Tile Pool Vacuum Head
Certikin Flexivac Tile/Concrete Pool Vacuum Head
- Versatile Design: Ideal for both tile and concrete pool surfaces.
- Flexible Construction: Adapts to various pool contours, including ledges and edges.
- Extra-Long Nozzle: Provides extended reach for thorough cleaning of large and hard-to-reach areas.
- Weighted Head: Ensures optimal contact with the pool surface for effective debris removal.
- Strategic Vent Holes: Enhances suction power and reduces clogging.
- Built-In Wheels: Offers easy manoeuvrability across the pool floor.
Compatibility with Extendable Poles:
The Certikin Flexivac Pool Vacuum Head is designed to fit seamlessly onto both the 6ft and 8ft extendable poles that we offer. Its universal attachment mechanism ensures a secure connection, allowing you to easily adjust the pole length according to your cleaning needs. Whether you require the shorter reach of the 6ft pole for precision work or the extended reach of the 8ft pole for larger pools, the Flexivac ensures a stable and efficient cleaning experience with either option.
1 in stock
Cascade aqua genie oriface return grill HG110.
Genuine Cascade part.
Cascade part number: HG110.
Rectangle oriface water return grill.
3 in stock
Certikin Graphite 9 inch flexible vac head with side brushes
The Certikin Flexible VAC Head is designed for efficient cleaning of concrete and tiled pools. Featuring a flexible 9” (230mm) body, integrated side brushes, and durable wheels, this VAC head ensures thorough and easy cleaning of pool floors. Part of the stylish Certikin Graphite range, it combines functionality with a sleek graphite grey design.
Key Features:
- Flexible 9” (230mm) Design: Adapts to pool contours for comprehensive cleaning.
- Integrated Side Brushes: Scrub and loosen dirt effectively.
- Durable Wheels: Smooth movement across the pool floor.
- Graphite Grey Color: Part of the Certikin Graphite range for a stylish look.
Perfect for maintaining clean and inviting pools, the Certikin Flexible VAC Head offers both practicality and elegance.
1 in stock
Genuine 40i Dolphin PoolStyle Robot Pool Cleaner with Wi-Fi & mobile app
1 in stock