Certikin wall inlet/return for concrete/tiled pools HD53C
£20.00
ertikin wall inlet/return for concrete/tiled pools HD53C.
Genuine Certikin product.
Certikin product code – HD53C.
These inlets accept 1.5″ imperial ABS pool pipe and 2″ imperial ABS pool pipe.
They are designed to be mounted into the concrete wall with a flush finish.
Certikin wall inlet/return for concrete/tiled pools HD53C
£20.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Certikin wall inlet/return for concrete/tiled pools HD53C
£20.00Ask a Question
Certikin wall inlet/return for concrete/tiled pools HD53C.
Genuine Certikin product.
Certikin product code – HD53C.
These inlets accept 1.5″ imperial ABS pool pipe and 2″ imperial ABS pool pipe.
They are designed to be mounted into the concrete wall with a flush finish.
Product dimensions:
- Diameter of face plate – 86mm
- Depth of inlet body – 2″
- Outer diameter of male thread – 63mm
Related Products
Certikin digital heating thermostat with sensor probe for heat exchanger 1706N.
Genuine Certikin spare.
Certikin part number: 1706N
Fits Bowman heat exchangers.
A highly accurate wall mounted thermostat.
1 in stock
Certikin ladder dimple pads 38mm SPC295.
Genuine Certikin spare.
Certikin part number: SPC295.
Rubber ladder pads which fit over the ladder rail to prevent any damage to the pool liner/wall. The dimensions of this product are:
- Length: 54mm
- Diameter: 38mm.
This product fits all Certikin 1.5″/38mm ladders.
4 in stock
Certikin deep bed filter laterals 2 pack SPEHSO916.
Genuine Certikin spare.
Certikin part numbers: CE04300916/SPEHSO916
1″ 275mm made for selected Certikin Deep bed filters.
1 in stock
Certikin filter pressure gauge 0.25″.
Genuine Certikin spare.
Part number: G3000.
For side/base entry.
Brass male BSP thread 0.25″
3 in stock
Certikin Vision top mount multi port valve o-ring.
Genuine Certikin spare.
Part number 3 in diagram.
Fits the Vision top mount sand filter sizes: 20″/24″/28″
Diameter – 6″
2 in stock
Certikin anit-vortex main drain HD33.
Genuine Certikin product.
Certikin product code: HD33.
Complete main drain for concrete, tiled or Marbalite finished pools.
4 in stock
Certikin ABS ladder anchors for 38mm ladder with bolts.
Genuine Certikin spare part.
Certikin part number: HD10A
These ladder anchors come complete with stainless stell bolts. These anchors are concreted in to the deck flush with the surface. The ladder then easily slides into the anchors and is then fixed into position by tightening the bolt.
White cover plates are available separately.
These are sold in a pair.
4 in stock
Certikin skimmer lid and frame extension ring.
Genuine Certikin spare.
Certikin part number: SPC4031
Made from ABS plastic.
4 in stock
Certikin skimmer basket with floating weir HD105.
Genuine Certikin product.
Certikin product code: HD105
A Certikin skimmer basket with a twist lock floating weir which can be removed.
Fits all Certikin skimmer housings.
7 in stock
Certikin Aquaspeed pump unions 2 pack.
Genuine Certikin spares.
Pack of 2 unions.
Pack includes:
- Socket union o – ring x 2
- Socket union nut x 2
- Socket union slip 2″ x 2
1 in stock
Genuine Certikin HPS Hydroswim Pump Basket SPHSP04
Reliable Replacement Part
Ensure the smooth operation of your pool’s circulation system with the Genuine Certikin HPS Hydroswim Pump Basket SPHSP04. As a genuine Certikin product, this pump basket is specifically designed to fit the Certikin range of Hydroswim pumps, providing a reliable replacement part that guarantees compatibility and optimal performance.
Compatibility and Efficiency
Designed to seamlessly integrate into Certikin’s Hydroswim pumps, the SPHSP04 pump basket ensures efficient filtration and debris capture. Its precise engineering and durable construction make it a dependable component for maintaining proper water circulation in your pool.
Easy Maintenance
Replacing worn or damaged pump baskets is essential for effective pool maintenance. With the Genuine Certikin HPS Hydroswim Pump Basket SPHSP04, maintenance becomes hassle-free. Simply install the genuine Certikin replacement part to keep your pool’s filtration system operating smoothly.
Trust in Certikin Quality
Trust in Certikin’s expertise and reputation for quality when it comes to pool maintenance. With the Genuine Certikin HPS Hydroswim Pump Basket SPHSP04, you can be confident in the reliability and performance of your pool’s filtration system.
1 in stock