Certikin skimmer lid frame SPC403
£25.00
Certikin skimmer lid frame SPC403.
Genuine Certikin product.
Certikin product code: SPC403
This frame is used on top of the skimmer main body to finish flush with the paving or decking.
Certikin skimmer lid frame SPC403
£25.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Certikin skimmer lid frame SPC403
£25.00Ask a Question
Certikin skimmer lid frame SPC403.
Genuine Certikin product.
Certikin product code: SPC403
This frame is used on top of the skimmer main body to finish flush with the paving or decking.
The width of this product is 10.5″ square, and is made for the 10″ Certikin skimmer lid.
Please not that this is the skimmer frame only. The lid is not included.
Related Products
Certikin ladder dimple pads 38mm SPC295.
Genuine Certikin spare.
Certikin part number: SPC295.
Rubber ladder pads which fit over the ladder rail to prevent any damage to the pool liner/wall. The dimensions of this product are:
- Length: 54mm
- Diameter: 38mm.
This product fits all Certikin 1.5″/38mm ladders.
4 in stock
Certikin deep bed filter laterals 2 pack SPEHSO916.
Genuine Certikin spare.
Certikin part numbers: CE04300916/SPEHSO916
1″ 275mm made for selected Certikin Deep bed filters.
1 in stock
Certikin flat main drain cover grill old type ABS SPC266.
Genuine Certikin part.
Certikin part number: SPC266
This grill is Certikin old type grill which offers a flush flat finish with the pool floor. This grill fits all Certikin older type main drains, the dimensions of this grill are:
- Diameter of grill: 185mm
- fixing hole to hole distance: 170mm
- Thickness: 10mm
4 in stock
Certikin anit-vortex main drain HD33.
Genuine Certikin product.
Certikin product code: HD33.
Complete main drain for concrete, tiled or Marbalite finished pools.
4 in stock
Certikin anti-vortex main drain for liner pools HD33L.
Genuine Certikin product.
Certikin product code: HD33L.
A complete main drain to be installed in liner finished pools.
Kit inlcudes:
- Main drain body.
- Anti-vortex main drain grill.
- Liner sealing clamp ring.
- Stainless steel screws for grill and clamp ring.
- 2 x Rubber gaskets.
5 in stock
Certikin HGS pump strainer basket SPHSP24.
Genuine Certikin part.
Certikin part number: SPHSP24.
Heavy duty plastic.
Clips together.
Built in handle for easy removal.
4 in stock
Certikin wide mouth liner complete skimmer.
Genuine Certikin skimmer.
Certikin code number: HD1001SLS
This skimmer is complete with:
- Skimmer basket and floating weir.
- Front face plate.
- 2 x gaskets.
- Clamp plate.
- Stainless steel screws for clamp plate.
4 in stock
Certikin Aquaspeed pump unions 2 pack.
Genuine Certikin spares.
Pack of 2 unions.
Pack includes:
- Socket union o – ring x 2
- Socket union nut x 2
- Socket union slip 2″ x 2
1 in stock
ertikin wall inlet/return for concrete/tiled pools HD53C.
Genuine Certikin product.
Certikin product code – HD53C.
These inlets accept 1.5″ imperial ABS pool pipe and 2″ imperial ABS pool pipe.
They are designed to be mounted into the concrete wall with a flush finish.
10 in stock
Certikin Vision top mount multi port valve o-ring.
Genuine Certikin spare.
Part number 3 in diagram.
Fits the Vision top mount sand filter sizes: 20″/24″/28″
Diameter – 6″
2 in stock
Certikin threaded back nut for inlets.
Genuine Certikin spare.
Certikin part number: SPC493
Made from high quality ABS plastic, this nut is used to secure a Certikin water return inlet through the pool panel, or wooden pool wall.
Overall diameter: 100mm
Diameter of thread: 57mm
2 in stock
CERTIKIN PU9 UNDER WATER LIGHT MICALLEF GLAND COMPLETE PU9MN
GENUINE CERTIKIN UNDER WATER LIGHT SPARES MICALLEF GLAND FOR PU9 LIGHT PART No – PU9MN
THIS GLAND FITS INTO THE WALL NICHE AND TIGHTEN UP THE WING NUT EXPANDS THE
INTERNAL RUBBER SEAL TO CREATE A WATER TIGHT SEAL AT THE CABLE TO PREVENT WATER LOSS FROM THE POOL
4 in stock