Certikin skimmer lid and frame extension ring
£28.00
Certikin skimmer lid and frame extension ring
The Certikin Skimmer Lid and Frame Extension Ring is a genuine Certikin ABS plastic extension ring designed to raise the height of your skimmer lid and frame so it sits flush with surrounding decking or paving.
-
Genuine Certikin spare part
-
Certikin part number: SPC4031
-
Raises and extends skimmer lid and frame height
-
Made from durable ABS plastic
-
Height: 2″
-
Internal diameter: 8″
-
External diameter: 8.5″
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.

Certikin skimmer lid and frame extension ring
£28.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question

Certikin skimmer lid and frame extension ring
£28.00Ask a Question
Certikin skimmer lid and frame extension ring
The Certikin Skimmer Lid and Frame Extension Ring is a genuine Certikin spare designed to raise and extend the height of your existing skimmer lid and frame so it can be brought level with surrounding decking or paving. This is an essential finishing component when adjusting ground levels or completing new pool surrounds.
Manufactured from durable ABS plastic, the Certikin Skimmer Lid and Frame Extension Ring is built for long-term outdoor use and reliable performance in poolside environments. It fits neatly between the skimmer body and the lid/frame assembly, allowing the skimmer opening to sit flush with the finished surface for a neat, professional appearance.
This extension ring is specifically designed for compatibility with Certikin skimmer systems and offers a practical solution when additional height is required during installation or refurbishment.
Key Features
-
Genuine Certikin spare part
-
Certikin part number: SPC4031
-
Manufactured from strong ABS plastic
-
Designed to raise and extend skimmer lid and frame height
-
Allows skimmer to sit flush with decking or paving
-
Ideal for new installations or pool refurbishments
Product Dimensions
-
Height: 2″
-
Internal diameter: 8″
-
External diameter: 8.5″
Using genuine Certikin components ensures correct fitment, reliable performance, and a clean finished appearance around your pool skimmer.
All products we sell are sourced from trusted manufacturers and supplied as genuine spares.
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help.
Thank you for choosing CrystalClear Leisure.
Related Products
Certikin stainless steel ladder anchor bolts SPC317
Certikin Stainless Steel Ladder Anchor Bolts SPC317 are genuine replacement bolts designed to securely fix ladder rails into deck-mounted ladder anchors. Made from corrosion-resistant stainless steel, they apply pressure to hold the ladder firmly in place, ensuring safe and stable pool access.
-
Genuine Certikin spare
-
Part number: SPC317
-
Stainless steel construction
-
Secures ladder rails into anchors
-
Ideal replacement for worn or damaged bolts
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
1 in stock
Certikin ladder dimple pads 38mm SPC295
Certikin Ladder Dimple Pads 38mm SPC295 are genuine rubber replacement pads designed to fit all Certikin 1.5″ / 38mm ladders. These durable pads fit over the ladder rails to protect pool liners and walls from damage, helping to extend the life of your pool surface.
-
Genuine Certikin spare
-
Part number: SPC295
-
Fits 38mm / 1.5″ ladder rails
-
Protects liners and pool walls
-
Durable rubber construction
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
3 in stock
Genuine Certikin Wall Return Inlet for Liner Pools HD53L
The Genuine Certikin Liner Water Return Inlet HD53L is a complete 1.5″ ABS wall return fitting supplied with eyeball, gaskets, clamp plate and screws for liner-finish swimming pools.
-
Designed for liner swimming pools
-
Accepts 1.5″ and 2″ UK pool pipe
-
Complete kit including eyeball, gaskets, clamp plate & screws
-
Suitable for concrete block walls and panel wall pools
-
Panel wall pools require a back nut (not included)
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help.
Thank you for choosing CrystalClear Leisure.
8 in stock
Certikin Digital Heating Thermostat with Sensor Probe for Heat Exchanger 1706N
Certikin Digital Heating Thermostat with Sensor Probe for Heat Exchanger 1706N is a genuine Certikin spare designed for accurate pool water temperature control. Suitable for Bowman heat exchangers, the wall-mounted digital thermostat includes a sensor probe that monitors water temperature and automatically switches the boiler on and off as required.
-
Genuine Certikin spare
-
Part number: 1706N
-
Fits Bowman heat exchangers
-
Supplied with sensor probe
-
Accurate digital temperature control
-
Automatically controls boiler operation
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
1 in stock
Pentair triton akita sand filter dome lid 6″ pre 1991 R154559.
Genuine Pentair spare part.
Pentair product code R154559.
Certikin part number FC4678/A.
This lid has a centre hole a the top of the filter for the fitting of a air bleed valve. The overall dimensions of this product are:
- Thread to thread: 6″
- Overall height: 165mm
1 in stock
Genuine Certikin anti vortex main drain for liner pools HD33L
The Genuine Certikin Anti Vortex Main Drain for Liner Pools HD33L is a complete kit for liner finished pools. It ensures effective water circulation and filtration from the deepest part of the pool.
-
Genuine Certikin Anti Vortex Main Drain HD33L
-
Complete kit includes main drain body, anti vortex grill, liner sealing clamp ring, stainless steel screws, and two rubber gaskets
-
Designed for liner finished pools to optimise circulation and filtration
-
Durable, chemical-resistant construction for long-lasting performance
-
Secure, leak-free installation for reliable pool operation
If you have any questions, please call our shop on 01268 776690 — we are always happy to help. Thank you for choosing CrystalClear Leisure.
5 in stock
Certikin skimmer basket with floating weir HD105
Keep your pool clean and your pump protected with this genuine Certikin skimmer basket, complete with a removable floating weir.
-
Genuine Certikin spare – part number HD105
-
Twist lock floating weir for easy removal and cleaning
-
Fits all Certikin skimmer housings
-
Durable, chemical-resistant construction
-
Captures leaves and debris before reaching the pump
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
7 in stock
Certikin PU9 under water light micallef gland complete PU9MN
Keep your Certikin PU9 underwater light secure and watertight with the Genuine Certikin PU9 Under Water Light Micallef Gland Complete PU9MN. Designed to fit perfectly into the wall niche, this genuine replacement expands the internal rubber seal when the wing nut is tightened, preventing water loss and ensuring safe, reliable performance.
-
Genuine Certikin part for PU9 underwater lights
-
Creates a watertight seal to prevent leaks
-
Easy to install and maintain
-
Durable, high-quality construction
If you have any questions about Genuine Certikin PU9 Under Water Light Micallef Gland Complete PU9MN or need advice for your spa, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
2 in stock
Certikin flat main drain cover grill old type ABS SPC266
Certikin Flat Main Drain Cover Grill Old Type ABS SPC266 is a genuine Certikin spare designed to fit older type Certikin main drains. With a 185mm diameter and flat flush design, this ABS grill provides a safe, professional finish to your pool floor while replacing worn or damaged covers.
-
Genuine Certikin part
-
Part number: SPC266
-
Fits older type Certikin main drains
-
185mm diameter, 170mm fixing hole distance, 10mm thick
-
Flush, flat design for pool floor safety
-
Durable ABS construction
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
1 in stock
Genuine Certikin Easy Fix Waterproof Underwater Repair Tape Clear
Versatile Repair Tape
The Genuine Certikin Easy Fix Waterproof Underwater Repair Tape – Clear offers versatile repair solutions for pool and pond liners, pipe leaks, filter tanks, and more.
Durable Adhesion
Crafted for strong adhesion to flat surfaces, this tape ensures long-lasting repairs, even in underwater conditions.
Quick Application
Easy and quick to apply, this tape provides instant bonding for efficient repairs with minimal downtime.
Transparent Seal
With its clear design, this tape creates a transparent seal for seamless repairs that maintain the visual appeal of water features.
Reliable Maintenance
Trust in Certikin quality for effective solutions to keep your water systems functional and leak-free.
Certikin Quality Assurance
Supplied by Certikin, a trusted name in the pool and spa industry, this repair tape offers reliable performance for your maintenance needs.
4 in stock
Genuine Certikin Aquaspeed pump unions 2 pack
The Genuine Certikin Aquaspeed Pump Unions 2 Pack is a high-quality replacement set designed to maintain secure, leak-free connections on your Certikin Aquaspeed pump. Each pack includes 2 O-rings, 2 nuts, and 2 × 2″ slip connectors, providing everything needed to replace worn or damaged unions and ensure reliable pump performance.
-
Genuine Certikin replacement spares
-
Pack of 2 unions with O-rings, nuts, and slip connectors
-
2″ socket union connections
-
Durable, chemical-resistant construction
-
Ensures secure, leak-free pump connections
If you have any questions, please call our shop on 01268 776690 — we’re always happy to help. Thank you for choosing CrystalClear Leisure.
1 in stock
Genuine Certikin wide mouth complete concrete skimmer
The Genuine Certikin Wide Mouth Complete Concrete Skimmer is a high-quality skimmer for concrete pool installations, providing efficient water circulation and debris removal.
-
Genuine Certikin wide mouth concrete skimmer
-
Ideal for concrete wall pool installations
-
Complete kit includes basket, front face plate, deck finish frame, and round lid
-
Easily installed at the correct height during pool construction
-
Plumbing at the bottom accepts 1.5 inch male thread fittings
-
Made from durable British white ABS
-
Ready to install for immediate use
If you have any questions, please call our shop on 01268 776690 — we are always happy to help. Thank you for choosing CrystalClear Leisure.
4 in stock
















