Certikin anti-vortex main drain for liner pools HD33L
£40.99
Certikin anti-vortex main drain for liner pools HD33L.
Genuine Certikin product.
Certikin product code: HD33L.
A complete main drain to be installed in liner finished pools.
Kit inlcudes:
- Main drain body.
- Anti-vortex main drain grill.
- Liner sealing clamp ring.
- Stainless steel screws for grill and clamp ring.
- 2 x Rubber gaskets.
Certikin anti-vortex main drain for liner pools HD33L
£40.99Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Certikin anti-vortex main drain for liner pools HD33L
£40.99Ask a Question
Certikin anti-vortex main drain for liner pools HD33L.
Genuine Certikin product.
Certikin product code: HD33L.
A complete main drain to be installed in liner finished pools.
Kit inlcudes:
- Main drain body.
- Anti-vortex main drain grill.
- Liner sealing clamp ring.
- Stainless steel screws for grill and clamp ring.
- 2 x Rubber gaskets.
Main drains installed into the floor of the pool to draw water from the deepest part of the pool for better circulation and filtration.
Product dimensions:
- Diameter of pot – 220mm
- Height of pot – 150mm
- Diameter of anti-vortex grill – 280mm
Related Products
Certikin ABS ladder anchors for 38mm ladder with bolts.
Genuine Certikin spare part.
Certikin part number: HD10A
These ladder anchors come complete with stainless stell bolts. These anchors are concreted in to the deck flush with the surface. The ladder then easily slides into the anchors and is then fixed into position by tightening the bolt.
White cover plates are available separately.
These are sold in a pair.
4 in stock
Certikin digital heating thermostat with sensor probe for heat exchanger 1706N.
Genuine Certikin spare.
Certikin part number: 1706N
Fits Bowman heat exchangers.
A highly accurate wall mounted thermostat.
1 in stock
Certikin thermoplastic multi port valve union, nut and slip.
Genuine Certikin part.
Part number: SPTH17.
Includes o – ring for slip.
1 in stock
Certikin wide mouth complete concrete skimmer.
Genuine Certikin skimmer.
Certikin product num: HD1001SCS.
This skimmer is complete with:
- Basket and floating weir.
- Round skimmer lid and lid frame.
- Front face plate.
4 in stock
Certikin skimmer lid frame SPC403.
Genuine Certikin product.
Certikin product code: SPC403
This frame is used on top of the skimmer main body to finish flush with the paving or decking.
2 in stock
Certikin threaded back nut for inlets.
Genuine Certikin spare.
Certikin part number: SPC493
Made from high quality ABS plastic, this nut is used to secure a Certikin water return inlet through the pool panel, or wooden pool wall.
Overall diameter: 100mm
Diameter of thread: 57mm
2 in stock
Certikin stainless steel ladder anchor bolts SPC317.
Genuine Certikin spare.
Certikin part number: SPC317
These bolts are used to secure ladders into the ladder anchors by being screwed into the anchor and applying pressure to the ladder rails.
1 in stock
Pentair triton akita sand filter dome lid 6″ pre 1991 R154559.
Genuine Pentair spare part.
Pentair product code R154559.
Certikin part number FC4678/A.
This lid has a centre hole a the top of the filter for the fitting of a air bleed valve. The overall dimensions of this product are:
- Thread to thread: 6″
- Overall height: 165mm
1 in stock
Certikin skimmer lid and frame extension ring.
Genuine Certikin spare.
Certikin part number: SPC4031
Made from ABS plastic.
4 in stock
Certikin flat main drain cover grill old type ABS SPC266.
Genuine Certikin part.
Certikin part number: SPC266
This grill is Certikin old type grill which offers a flush flat finish with the pool floor. This grill fits all Certikin older type main drains, the dimensions of this grill are:
- Diameter of grill: 185mm
- fixing hole to hole distance: 170mm
- Thickness: 10mm
4 in stock
Certikin Aquaspeed pump unions 2 pack.
Genuine Certikin spares.
Pack of 2 unions.
Pack includes:
- Socket union o – ring x 2
- Socket union nut x 2
- Socket union slip 2″ x 2
1 in stock
Certikin automatic water level controller device HD108.
Genuine Certikin part.
Certikin part number: HD108
This device maintains a constant water level in the pool and will automatically raise the water to the set level determined by the float.
1 in stock