Certikin anti-vortex main drain HD33
£51.99
Certikin anit-vortex main drain HD33.
Genuine Certikin product.
Certikin product code: HD33.
Complete main drain for concrete, tiled or Marbalite finished pools.
Certikin anti-vortex main drain HD33
£51.99Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
Certikin anti-vortex main drain HD33
£51.99Ask a Question
Certikin anit-vortex main drain HD33.
Genuine Certikin product.
Certikin product code: HD33.
Complete main drain for concrete, tiled or Marbalite finished pools.
Installed into the pool floor for circulation and to provide filtration to the bottom/deep end of the pool.
This main drain accepts 2″ imperial pool pipe into the side of the body. 1.5″ imperial pool pipe can be used if 2″-1.5″ threaded reducer is used.
Product dimensions:
- Depth of pot – 150mm
- Diameter of pot – 220mm
- Diameter of anti-vortex grill – 280mm.
Related Products
Certikin concrete main drain body and grill HD33D.
Genuine Certikin product.
This main drain is Certikin old type which is designed to create a level finish on the pool floor. This particular main drain is made for concrete pools.
This includes:
- Main drain body
- cover grill
- 2 x stainless steel screws
- instruction manual.
2 in stock
Certikin automatic water level controller device HD108.
Genuine Certikin part.
Certikin part number: HD108
This device maintains a constant water level in the pool and will automatically raise the water to the set level determined by the float.
1 in stock
Certikin deep bed filter laterals 2 pack SPEHSO916.
Genuine Certikin spare.
Certikin part numbers: CE04300916/SPEHSO916
1″ 275mm made for selected Certikin Deep bed filters.
1 in stock
CERTIKIN PU9 UNDER WATER LIGHT MICALLEF GLAND COMPLETE PU9MN
GENUINE CERTIKIN UNDER WATER LIGHT SPARES MICALLEF GLAND FOR PU9 LIGHT PART No – PU9MN
THIS GLAND FITS INTO THE WALL NICHE AND TIGHTEN UP THE WING NUT EXPANDS THE
INTERNAL RUBBER SEAL TO CREATE A WATER TIGHT SEAL AT THE CABLE TO PREVENT WATER LOSS FROM THE POOL
4 in stock
Certikin filter pressure gauge 0.25″.
Genuine Certikin spare.
Part number: G3000.
For side/base entry.
Brass male BSP thread 0.25″
3 in stock
Pentair triton akita sand filter dome lid 6″ pre 1991 R154559.
Genuine Pentair spare part.
Pentair product code R154559.
Certikin part number FC4678/A.
This lid has a centre hole a the top of the filter for the fitting of a air bleed valve. The overall dimensions of this product are:
- Thread to thread: 6″
- Overall height: 165mm
1 in stock
Certikin skimmer lid HD100.
Genuine Certikin product.
Certikin product number: HD100.
This lid fits the standard Certikin skimmers and measure 10 inches across.
2 x Counter sunk holes for screws.
5 in stock
Certikin PU9 Standard LT White LED Pool Light – Liner
Certikin PU9LLTW – Liner Light & Niche –
These complete lights are ideal for new builds or refurbishment works.
Consists of the LT LED guts pack & the recieving wall Niche which the light secures into, Just add Deck Box & your choice of transformer to complete your installation.
The Complete light comes with a cable length of 2.8m , and the light comes complete with the light conduit or Hockey Stick.
4 in stock
ertikin wall inlet/return for concrete/tiled pools HD53C.
Genuine Certikin product.
Certikin product code – HD53C.
These inlets accept 1.5″ imperial ABS pool pipe and 2″ imperial ABS pool pipe.
They are designed to be mounted into the concrete wall with a flush finish.
10 in stock
Certikin ladder dimple pads 38mm SPC295.
Genuine Certikin spare.
Certikin part number: SPC295.
Rubber ladder pads which fit over the ladder rail to prevent any damage to the pool liner/wall. The dimensions of this product are:
- Length: 54mm
- Diameter: 38mm.
This product fits all Certikin 1.5″/38mm ladders.
4 in stock
Certikin flat main drain cover grill old type ABS SPC266.
Genuine Certikin part.
Certikin part number: SPC266
This grill is Certikin old type grill which offers a flush flat finish with the pool floor. This grill fits all Certikin older type main drains, the dimensions of this grill are:
- Diameter of grill: 185mm
- fixing hole to hole distance: 170mm
- Thickness: 10mm
4 in stock