Acti Spa Alkalinity Increaser 1KG
£14.00
Acti Spa Alkalinity Increaser 1KG
Genuine ACTI product
Low total alkalinity (TA) may cause spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained between 80 – 150 mg/l (ppm). Test the total alkalinity level of spa water and if it is below 80mg/l (ppm), use Alkalinity increase to increase the level.
Application instructions:
Pre dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1 lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned on, preferably near the water inlets to aid distribution. The total amount of alkalinity increaser can be applied in one application.
Low total alkalinity (TA) may cause spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained between 80 – 150 mg/l (ppm). Test the total alkalinity level of spa water and if it is below 80mg/l (ppm), use Alkalinity increase to increase the level.
Application instructions:
Pre dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1 lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa whilst the pump(s) are turned on, preferably near the water inlets to aid distribution. The total amount of alkalinity increaser can be applied in one application.
| Water volumes | Dose rates
| ||
| Litres | Gallons | To increase total alkalinity by 10mg/l (ppm) | To increase total alkalinity by 25mg/l (ppm)
|
| 1,000 | 220 | 18g | 45g |
| 1,500 | 330 | 27g | 68g |
General precautions
Dosing
- Wear eye and face protection and ensure granules are not blown back into your face.
- Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
- When pre dissolving always add products to water and not vice versa
Handling/storage
- Handle products in a well-ventilated area – preferably outdoors
- Wash hands after use
- Ensure chemicals do not become damp in storage – Store in a cool dry place.
All products we sell are high quality and come from trusted manufacturers. The majority of our products are ready to be posted and in stock. Our webstore offers a vast selection of high-quality products, including pumps, filters, heaters, maintenance equipment, spares and much more. We carefully select only the best products to ensure that you have access to the highest quality items on the market. This is our family-run webstore, with over 75 years of combined experience. We are dedicated to providing you with the best products and services in the swimming pool and hot tub industry. We pride ourselves on our extensive knowledge and expertise, and we’re always happy to share it with our customers. Thank you for choosing our webstore as your go-to source for all swimming pool and hot tub needs. We look forward to helping you maintain your pool or hot tub for years to come!
If you have any questions about parts or knowledge, please contact us.
Any trade customers we can sort out discounts and can sell at trade prices.
Related Products
ACTI 5 5KG Multifunctional Chlorine Granules Stabilised
Genuine ACTI Product
These granules provide an easy way to maintain chlorine levels in your swimming pool. They are specially formulated to prevent bacteria growth, discourage algae, provide continuous clarification, stabilise against chlorine loss to sunlight and reduce amount of chlorine consumed.
2 in stock
Aquasparkle 1KG Multi Functional Chlorine Tablets
Genuine Aquasparkle product
Aquasparkle Multifunctional Mini 20g Chlorine Tablets are designed for maintaining water quality in hot tubs, spas, and above-ground pools. Here’s a breakdown of their use and application instructions:
Ideal Water Levels:
- Prior to using these tablets, it’s important to adjust the pH levels of your water to the ideal range of 7.2 – 7.6. This helps ensure bather comfort, protects spa equipment, and promotes the effective use of chemicals.
Tablet Features:
- These tablets slowly erode over 3-5 days, depending on factors such as temperature and water flow. Because they release chlorine slowly, it may be necessary to shock dose or oxidize the water before their use to establish chlorine more rapidly.
- Ideal chlorine levels should be between 1-3 mg/l (ppm) for pools and 3-5 mg/l (ppm) for spas, as measured by a test kit or test strips.
- These tablets are multifunctional, containing a built-in clarifier and algaecide to help maintain clear and clean water.
5 in stock
ACTI PH Minus 7KG.
Genuine ACTI product.
pH Minus Powder. The pH scale ranges from 0 to 14 and measures the acidity or alkalinity of the water. A pH of less than 7 means the water is acidic, a reading above 7 means the water is alkaline and a pH of 7 is neutral. Ideally the pH for swimming pools is between 7.2 and 7.6. Having the water slightly alkaline means that the pool is more comfortable for swimmers and the equipment is protected from the corrosive water. The effects of a high pH level (too alkaline) means the water can become cloudy, swimmers skin can become dry, chlorine becomes less effective and scale can form.
20 in stock
Relax Stabilised Chlorine Granules 1KG
Genuine Relax Product
These stabilised swimming pool chlorine granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
They are rapid dissolving and have minimal impact on pH.
Ensure your swimming pool water is kept in perfect condition with our swimming pool chemicals range all available ex stock.
Application Instructions
1. Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust.
2. Maintain free chlorine residuals within the range Pools: 1 – 3mg/l (ppm); Spas: 3 – 5 mg/l (ppm). * Freshly filled spas require initial shock or start up dose of 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools and spas where temperatures exceed 20ºC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10l) of water. Stir well to ensure the product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned ‘on’ preferably near the water inlets to aid distribution.
4. Repeat dose application if necessary to achieve levels in point 2 above.
5. It is recommended that you periodically (e.g. weekly/fortnightly) shock or oxidise your water, using shock or oxidiser products, to eliminate any excess contamination.
5 in stock
AquaSPArkle O2 Gentle Spa Starter Kit
Genuine AquaSparkle product
- Luxurious water quality without chemical odours
- Gentler to skin and hair than normal chemicals
- Fast dissolving formula
- Complete spa care system to keep your water in tip-top condition
- Gentle and soft active oxygen treatment offering a chlorine and bromine free solution
- Simple two-step application for soft and gentle chlorine-free spa water
Kit Contains:
- 1kg O2 Gentle Granules
- 5ltr O2 Gentle Liquid
- 500g pH Plus
- 1 x Spa Fusion
- 3 Way Aquablanc Test Strips
- 10ml Scoop
- 50ml Measuring Cup
- Easy to follow guide.
2 in stock
HTH Granufast Stabilised Chlorine Granules 1.2KG
Genuine HTH Product
Product Description: HTH Granufast Chlorine Granules offer swifter and more effective pool disinfection compared to other swimming pool chlorine brands. With an impressive 56% available chlorine content, HTH Granufast surpasses the competition in delivering superior sanitization for your pool.
Key Advantages:
- HTH Granufast outperforms lesser chlorine granules available in the swimming pool market.
- Swiftly elevates Free Chlorine levels as per your needs.
- These stabilized chlorine granules work rapidly without affecting pH levels.
- High stabilizer levels effectively reduce chlorine loss due to sunlight exposure.
3 in stock
Blue Horizons JellyCLEAR Cube (1 x 70g)
Genuine Blue Horizon product
Blue Horizons JellyCLEAR Cubes are gel blocks designed for pool water clarification. These cubes are conveniently packaged in single-use JellyCLEAR Cube presentation packs. They enhance filtration efficiency by coagulating debris and “tightening” the filter bed. Easy and safe to use in skimmers or weirs, each gel block treats up to 50,000 litres (11,000 gallons) for up to 2 weeks.
11 in stock
Acti 1Ltr Water Clarifier
Genuine ACTI Product
The Acti Spa Water Clarifier is a product designed to keep your spa water crystal clear. It achieves this by gathering small, suspended particles and binding them together into larger clumps, making it easier for the filtration system to capture and remove them. This clarifier is highly effective at preventing your spa water from appearing dull or cloudy, which can occur due to the presence of tiny particles like dead algae, skin cells, and other debris that are too minuscule to be effectively trapped by the standard filter system. By using the Acti Spa Water Clarifier, you can enjoy consistently clear and inviting spa water.
1 in stock
Lo-Chlor Algaecide 500ml
Genuine Lo-Chlor product
Lo-Chlor Algaecide is a long-life algaecide which will prevent algae growth for up to 6 months. An ideal treatment to use when opening your swimming pool at the start of season and for both summer and winter maintenance. 1 Litre treats up to 26,400 gallons of pool water.
25 in stock
ACTI Multifunctional Ultimate Floating Dispenser 720g
Genuine ACTI Product
The Ultimate Floating Dispenser is pre-filled with stabilised chlorine tablets which slowly dissolve over a 2 – 5 week period. Ideal for when you are unable to dose your pool on a regular basis or for during holiday periods.
The tablets contained within the dispenser have a high level of chlorine are stabilised to minimise chlorine loss to sunlight in outdoor pools; and contain a clarifier for sparkling clear water.
The 720g version is suitable for swimming pools between 2,500 – 5,000 gallons whilst the 1.5kg product will treat pools between 5,000 and 20,000 gallons.
1 in stock
ACTI 500g Floc Tablets
Genuine ACTI Product
These popular easy to use 50g floc tablets should be applied weekly to prevent hazy water or alternatively if water clarity is poor. Use with sand filters only and apply via a clean and empty skimmer basket. ACTI Floc Tablets work in conjunction with the sand filter to remove fine particles from the pool, helping you achieve crystal clear water.
ACTI Floc Tablets
10 x 50g Floc tablets
Clarity problems may occur when undissolved solids are present in pool water, either due to heavy use, chemical imbalances, or after algae destruction. Acti Floc tablets will assist your sand filter to remove small suspended solids or particles that otherwise may prove difficult to remove.
3 in stock
ACTI Small Chlorine Tablets 2.5KG
Genuine ACTI product
The most common way to kill bacteria in your pool and keep your swimming pool water healthy is to use chlorine. Before using chlorine, it is important to have a correct water balance first. Once this has been achieved, chlorine levels between 1.0-3.0 mg/l should be satisfactory to preserve bacteria free swimming pool water. There are two ways to tell if your pool is a well-managed chlorine treated swimming pool: It will have no odour and the level of chloramines will be less than 0.5 mg/l.
Mini 20g Chlorine Tablets
These small chlorine tablets will slowly erode over a period of 3-5 days depending on the water flowing over them.
Prior to using these chlorine tablets, adjust the pH levels to the ideal range of 7.2 – 7.6 to promote bather comfort and effective chemical use.
These tablets are designed for use with chlorine feeders or floating dispensers. As they release chlorine relatively slowly it may be necessary to shock or oxidise prior to their use to first establish some chlorine more rapidly. Ideal chlorine levels are between 1-3 mg/l (ppm).
3 in stock