ACTI PH Minus 7KG
£22.00
ACTI PH Minus 7KG.
Genuine ACTI product.
pH Minus Powder. The pH scale ranges from 0 to 14 and measures the acidity or alkalinity of the water. A pH of less than 7 means the water is acidic, a reading above 7 means the water is alkaline and a pH of 7 is neutral. Ideally the pH for swimming pools is between 7.2 and 7.6. Having the water slightly alkaline means that the pool is more comfortable for swimmers and the equipment is protected from the corrosive water. The effects of a high pH level (too alkaline) means the water can become cloudy, swimmers skin can become dry, chlorine becomes less effective and scale can form.
ACTI PH Minus 7KG.
Genuine ACTI product.
pH Minus Powder. The pH scale ranges from 0 to 14 and measures the acidity or alkalinity of the water. A pH of less than 7 means the water is acidic, a reading above 7 means the water is alkaline and a pH of 7 is neutral. Ideally the pH for swimming pools is between 7.2 and 7.6. Having the water slightly alkaline means that the pool is more comfortable for swimmers and the equipment is protected from the corrosive water. The effects of a high pH level (too alkaline) means the water can become cloudy, swimmers skin can become dry, chlorine becomes less effective and scale can form.
pH Minus
For decreasing the pH level in swimming pool and spa water
High pH (Alkali) will cause scale formation, poor chlorine efficiency, cloudy water and itchy skin.
pH Minus (Dry Acid) contains Sodium Hydrogen Sulphate
The ideal pool pH levels are between 7.2 -7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Routinely test the pH of your pool water and if it is above 7.6 use pH Minus to reduce it.
Application Instructions: Pre-dissolve the product in a clean plastic container, with no other chemical present, at a maximum rate of 100g per 10 litres (2.2 gallons) of clean warm water. Stir well to ensure the product is fully dissolved. Carefully add the resulting solution to the pool whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the pH is established. Please read the packaging and full instructions prior to use.
NOTE: Splash, Relax, Swimfresh, Acti, & Cascade labels are all the same product. Different distributors may be used at peak times to ensure sufficient stock levels.
- pH Minus
- Decreases the pH level in pool and spa water
- Promotes bather comfort, chemical efficiency and protection of pool & spa equipment
- Ideal pH level is between 7.2 – 7.6
- High pH (above 7.6) can cause scale formation on pool surfaces and heating elements
- Available in 1.5kg, 7kg & 25kg containers
Related Products
ACTI 5KG Stabilised Chlorine Granules
Genuine ACTI Product
These chlorine granules are a popular product for ensuring pool and spa water is safe and bacteria free.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water. They are suitable for shock dosing small above ground pools. You can find dosing amounts below.
Key Features
Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
3 in stock
AquaSPArkle O2 Gentle Spa Starter Kit
Genuine AquaSparkle product
- Luxurious water quality without chemical odours
- Gentler to skin and hair than normal chemicals
- Fast dissolving formula
- Complete spa care system to keep your water in tip-top condition
- Gentle and soft active oxygen treatment offering a chlorine and bromine free solution
- Simple two-step application for soft and gentle chlorine-free spa water
Kit Contains:
- 1kg O2 Gentle Granules
- 5ltr O2 Gentle Liquid
- 500g pH Plus
- 1 x Spa Fusion
- 3 Way Aquablanc Test Strips
- 10ml Scoop
- 50ml Measuring Cup
- Easy to follow guide.
2 in stock
ACTI 10KG Large (200g) Stabilised Chlorine Tablets
Genuine ACTI Product
Key Features:
- High Chlorine Concentration
- Gradual Dissolution Over 3.5 Days (Depending on Water Flow)
- Recommended pH Range: 7.2 – 7.6
- Effective Bacteria Control for Swimming Pools
Product Description: ACTI LARGE Stabilised Chlorine Tablets are a reliable solution for maintaining clean and healthy swimming pool water. With a high chlorine concentration, these tablets dissolve slowly over approximately 3.5 days, ensuring consistent and efficient water treatment. However, some initial adjustments might be needed.
Before using these chlorine tablets, it’s crucial to ensure your pool’s pH levels are within the ideal range of 7.2 – 7.6. Given the gradual chlorine release, it might be necessary to shock your pool initially to establish chlorine levels more rapidly.
The recommended chlorine levels for a bacteria-free swimming pool typically range between 1-3 mg/l (ppm). Achieving this balance is essential for crystal-clear, odourless pool water. Maintaining chlorine within this range not only keeps the water safe but also prevents the formation of chloramines, which should be kept below 0.5 mg/l.
2 in stock
HTH Spa Non-Chlorine Shock powder 1.2 KG
Genuine HTH Product
HTH SPA Non-Chlorine Shock is a product designed for maintaining and treating hot tub spa water. Here’s some key information about this product:
- Suitable for Bromine or Chlorine Sanitizers: This product is versatile and can be used with hot tubs and spas that use either Bromine or Chlorine sanitizers. It’s essential to ensure compatibility with your specific hot tub water treatment method.
- Shock Treatment: HTH SPA Non-Chlorine Shock serves as a shock treatment. Shock treatments are typically used to rapidly increase sanitizer levels in the hot tub water. This helps eliminate organic pollutants, such as bacteria and other contaminants, to ensure the water remains clean and safe.
- Weekly Use: It’s recommended to add HTH SPA Non-Chlorine Shock to your hot tub once a week. This regular application is intended to restore and maintain the appropriate levels of Bromine or Chlorine in your spa water. Adequate sanitizer levels are crucial for water disinfection and clarity.
- Cloudy Water or Odor Control: In addition to regular weekly use, this product can also be added immediately when you notice signs of water issues. If your spa water becomes slightly cloudy or develops a “musty” smell when you open the hot tub lid, it’s an indication that the water quality may have deteriorated. Adding HTH SPA Non-Chlorine Shock at this point can help address these problems and restore the water’s quality.
Overall, HTH SPA Non-Chlorine Shock is a maintenance product for hot tubs and spas that provides both regular upkeep and quick response to water quality issues. It is a helpful tool to keep your spa water free from harmful bacteria and maintain crystal-clear water. Please follow the manufacturer’s instructions for the specific dosage and application method for your hot tub or spa to ensure effective and safe usage.
3 in stock
Acti 1Ltr Water Clarifier
Genuine ACTI Product
The Acti Spa Water Clarifier is a product designed to keep your spa water crystal clear. It achieves this by gathering small, suspended particles and binding them together into larger clumps, making it easier for the filtration system to capture and remove them. This clarifier is highly effective at preventing your spa water from appearing dull or cloudy, which can occur due to the presence of tiny particles like dead algae, skin cells, and other debris that are too minuscule to be effectively trapped by the standard filter system. By using the Acti Spa Water Clarifier, you can enjoy consistently clear and inviting spa water.
1 in stock
ACTI 500g Floc Tablets
Genuine ACTI Product
These popular easy to use 50g floc tablets should be applied weekly to prevent hazy water or alternatively if water clarity is poor. Use with sand filters only and apply via a clean and empty skimmer basket. ACTI Floc Tablets work in conjunction with the sand filter to remove fine particles from the pool, helping you achieve crystal clear water.
ACTI Floc Tablets
10 x 50g Floc tablets
Clarity problems may occur when undissolved solids are present in pool water, either due to heavy use, chemical imbalances, or after algae destruction. Acti Floc tablets will assist your sand filter to remove small suspended solids or particles that otherwise may prove difficult to remove.
3 in stock
ACTI 5 1KG Multifunctional Chlorine Tablets
Genuine ACTI product
ACTI Multifunctional Mini 20g Chlorine Tablets are designed for maintaining water quality in hot tubs, spas, and above-ground pools. Here’s a breakdown of their use and application instructions:
Ideal Water Levels:
- Prior to using these tablets, it’s important to adjust the pH levels of your water to the ideal range of 7.2 – 7.6. This helps ensure bather comfort, protects spa equipment, and promotes the effective use of chemicals.
Tablet Features:
- These tablets slowly erode over 3-5 days, depending on factors such as temperature and water flow. Because they release chlorine slowly, it may be necessary to shock dose or oxidize the water before their use to establish chlorine more rapidly.
- Ideal chlorine levels should be between 1-3 mg/l (ppm) for pools and 3-5 mg/l (ppm) for spas, as measured by a test kit or test strips.
- These tablets are multifunctional, containing a built-in clarifier and algaecide to help maintain clear and clean water.
1 in stock
ACTI 5 5KG Multifunctional Chlorine Tablets (200g) Stabilised
Genuine ACTI Product
Key Features:
- Slow Erosion Over 3-5 Days, Depending on Water Flow
- Contains Clarifier & Algaecide
- Ideal for Maintaining Bacteria-Free and Healthy Swimming Pool Water
- Effective pH Range: 7.2 – 7.6
- Chlorine Levels: 1.0-3.0 mg/l (ppm)
Product Description: Ensuring your swimming pool remains a safe and enjoyable space requires the effective control of bacteria, and the most common method for achieving this is by using chlorine. However, before introducing chlorine, it’s imperative to establish the correct water balance. Once the water balance falls within the recommended pH range of 7.2 – 7.6, maintaining chlorine levels between 1.0-3.0 mg/l (ppm) is typically sufficient to preserve a bacteria-free swimming environment.
There are two key indicators of a well-managed chlorine-treated pool: it should be odourless, and the level of chloramines should be maintained at less than 0.5 mg/l.
Usage Guidelines:
- As these tablets release chlorine gradually, consider performing a shock dose or oxidation treatment before their use to establish chlorine levels more rapidly.
- Important: Do not add the tablets directly to the pool. Always use a clean applicator, ensuring no other products are present.
2 in stock
ACTI 5 5KG Multifunctional Chlorine Granules Stabilised
Genuine ACTI Product
These granules provide an easy way to maintain chlorine levels in your swimming pool. They are specially formulated to prevent bacteria growth, discourage algae, provide continuous clarification, stabilise against chlorine loss to sunlight and reduce amount of chlorine consumed.
2 in stock
HTH 5KG Granufast Stabilised Chlorine Granules
Genuine HTH Product
HTH Granufast Chlorine Granules offer swifter and more effective pool disinfection compared to other swimming pool chlorine brands. With an impressive 56% available chlorine content, HTH Granufast surpasses the competition in delivering superior sanitization for your pool.
Key Advantages:
- HTH Granufast outperforms lesser chlorine granules available in the swimming pool market.
- Swiftly elevates Free Chlorine levels as per your needs.
- These stabilized chlorine granules work rapidly without affecting pH levels.
- High stabilizer levels effectively reduce chlorine loss due to sunlight exposure.
Easy Instructions for Low Chlorine Levels in Your Pool:
1 in stock
HTH 1.66 KG Easyclic Multifunctional Floating Dispenser
Genuine HTH Product
The HTH Easyclic Multifunctional Chlorine Dispenser, formerly known as Fi Clor 5 Buoy, offers comprehensive protection for your pool in four distinct ways: Shock Chlorination, Regular Stabilised Chlorination, Anti-Algae, and Water Clarification.
When employed as a Day-to-Day sanitizer, the HTH Easyclic Dispenser ensures a consistent and controlled release of stabilized chlorine over several weeks. This stabilizing chlorine predominantly operates in the upper layer of pool water, addressing the critical areas where contaminants and external pollutants are most concentrated, thereby reducing the potential for bacterial and algal growth.
Contained within the HTH Easyclic dispenser is 1.66 kilograms of Multifunctional Chlorine. Additionally, the Easyclic system introduces a measured amount of Shock Chlorine into the pool, which is uniformly distributed to eliminate organic matter that should not be present. An ongoing supply of algaecide is also dispensed to maintain the required level while the dispenser contains tablets.
Furthermore, the HTH Easyclic dispenser incorporates a water clarifying agent, contributing to the pool’s overall clarity and safety for swimmers.
This versatility makes the HTH Easyclic an excellent choice for routine use alongside other HTH chlorine sanitising products or during periods when the pool is not in use, such as when you are on holiday.
3 in stock
ACTI Small Chlorine Tablets 2.5KG
Genuine ACTI product
The most common way to kill bacteria in your pool and keep your swimming pool water healthy is to use chlorine. Before using chlorine, it is important to have a correct water balance first. Once this has been achieved, chlorine levels between 1.0-3.0 mg/l should be satisfactory to preserve bacteria free swimming pool water. There are two ways to tell if your pool is a well-managed chlorine treated swimming pool: It will have no odour and the level of chloramines will be less than 0.5 mg/l.
Mini 20g Chlorine Tablets
These small chlorine tablets will slowly erode over a period of 3-5 days depending on the water flowing over them.
Prior to using these chlorine tablets, adjust the pH levels to the ideal range of 7.2 – 7.6 to promote bather comfort and effective chemical use.
These tablets are designed for use with chlorine feeders or floating dispensers. As they release chlorine relatively slowly it may be necessary to shock or oxidise prior to their use to first establish some chlorine more rapidly. Ideal chlorine levels are between 1-3 mg/l (ppm).
3 in stock