1.5” male threaded hose tail for 32mm – 38mm pipe with o – ring
£5.00
1.5” male threaded hose tail for 32mm – 38mm pipe with o – ring.
Made from high quality ABS plastic.
Includes o – ring at the top of the thread to ensure a water tight seal without the need of PTFE tape or silicone.
The ribbed plastic helps ensure the flexi pipe wont disconnect when under pressure
1.5” male threaded hose tail for 32mm - 38mm pipe with o - ring
£5.00Request a Call Back
- Delivery & Return
Returns
Should you require any further information, please email accleisure@aol.com where we will respond to your request quickly.
At our discretion, we may accept goods returned to use unwanted outside of the 14 days, but no more than 28 days from the date of purchase, but these goods will be subject to a 50% – 75% restocking charge, subject to the condition of the returned goods.
On cancellation, you must return the goods to us at your cost, the goods should ideally be returned in original condition unused with the original packing or suitable packaging to avoid the goods being damaged on their return journey. If the goods are being returned because they are faulty, incorrect goods or because of unsuitable substitution by us, in which case we will meet the cost of return but we ask that you allow us to nominate the carrier, and all warranty decisions will be issued by the manufacturer/UK importer, before any warranty refunds can be validated & processed
If you have notified us of a problem with the goods, we will (at your option) either make good any shortage or non-delivery; replace or repair any goods that are damaged or defective upon delivery; or refund to you the amount paid by you for the goods in question. We will not be liable to you for any loss of profits, administrative inconvenience, disappointment, indirect or consequential loss or damage arising out of any problem in relation to the goods and we shall have no liability to pay any money to you by way of compensation other than any refund we make under these conditions. This does not affect your statutory rights as a consumer, nor is it intended to exclude our liability to you for fraudulent misrepresentation or for death or personal injury resulting from our negligence.
If you instruct us to leave your goods without a signature, i.e. an unattended delivery, the responsibility falls on you to ensure a safe delivery site. We will not be held responsible for lost items if your delivery instructions have been passed to our carrier. For all above ground pools especially wooden pools, we require that you ensure an able bodied person meet and assist with the delivery.
All dimensions displayed for each product are meant as a guide only, and if you require exact measurements, please contact us via post, telephone, fax or email. Above ground pools, in particular splasher/quick up pools can vary slightly in size to that shown, as these sizes are meant as a general overall guide to the size of the pool. Water depths can vary; depending on the level you fill the pool. Diving is strictly prohibited in above ground pools. All pumps & electrical heating devices should always be switched off when using Above Ground Pools to remove the risk of electric shock. All Pumps & electric heaters should be located at least 2 metres away from the waters edge, or be secured in a locked, waterproof enclosure.
- Ask a Question
1.5” male threaded hose tail for 32mm - 38mm pipe with o - ring
£5.00Ask a Question
1.5” male threaded hose tail for 32mm – 38mm pipe with o – ring.
Made from high quality ABS plastic.
Includes o – ring at the top of the thread to ensure a water tight seal without the need of PTFE tape or silicone.
The ribbed plastic helps ensure the flexi pipe wont disconnect when under pressure. A jubilee clip should be used to clamp the flexi pipe down to be sure the pipe is properly connected.
The biggest difference between ABS and PVC piping is that ABS pipe contains a chemical called bisphenol A, also known as BPA, and PVC doesn’t. BPA is used in various types of plastics and resins because it creates durable pipes.
Related Products
Swimming pool 90 degree elbow 1.5″
Made from high quality ABS class C plastic.
This fitting is made to join 1.5″ pipe to 1.5″ pipe to form a perfect 90 degree bend.
Swimming pool plain reducer 2″ – 1.5″
Made from high quality ABS class C plastic.
This fitting is designed to reduce 2″ pipe fittings down to 1.5″ ABS pipe. Or to increase 1.5″ pipe to fit 2″ fittings.
Swimming pool plain reducing hosetail 1.5”
Swimming pool plain reducing hosetail 1.5”are made from 100% ABS.
This fitting is designed to be glued over 1.5” pipe and reduce down to either 38mm or 32mm.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
Swimming pool pipe end cap 1.5”
Swimming pool pipe end cap 1.5” are made from 100% ABS.
This fitting is designed to glue onto a 1.5” pipe to cap off the pipe.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.
Rotabond 2000 290ml – Black
A high quality, single component MS – polymer underwater sealant.
Environmentally friendly
Can also be applied on wet surfaces, even underwater.
Odourless and fast curing.
Stays permanently flexible.
Swimming Pool Wet R Dry 725 Fast Cure Pipe Cement 250ml.
For joining PVC and ABS (flexible) tubes, coupling sleeves and fittings in Swimming Pool Pipework up to diameter 160 mm.
Maximum pressure 16 bar for PVC, and 5 bar for ABS. Can be used in damp conditions, but not below 5آ° C.
Swimming pool socket union 2″
Made from high quality ABS class C plastic.
This fitting is designed and ideal to be used to connect pipe to pipe found on pumps, filters and heaters whilst also allowing the flexibility to undo the large union nut and separate the pipe without having to cut the pipe.
Swimming pool socket union 1.5″
Made from high quality ABS class C plastic.
This fitting is made to join 1.5″ pipe to 1.5″ pipe commonly found before and after filters, heaters and pumps. It also allows you to disconnect pipe without having to cut the pump, making it easier to remove your hardware e.g: Pump, filter and heater if they need repairing or replacing.
2″ Male thread union.
Made from high quality ABS class C plastic.
This fitting is designed and ideal to be used to connect pipe to threads found on pumps, filters and heaters whilst also allowing the flexibility to undo the large union nut and separate the pipe without having to cut the pipe.
1.5” ABS male hose tail 32mm – 38mm.
Made from high quality ABS plastic.
The biggest difference between ABS and PVC piping is that ABS pipe contains a chemical called bisphenol A, also known as BPA, and PVC doesn’t. BPA is used in various types of plastics and resins because it creates durable pipes.
2″ 90 degree elbow ABS.
Made from high quality ABS plastic, which is lightweight, high strength and flexible.
Swimming Pool Tee Piece – 1.5″
Designed to joint three lengths of pipe together in a solvent welded join.
Made from high quality ABS class C plastic.
ABS (Acrylonitrile butadiene styrene) is an extremely robust thermoplastic material which is ideal for swimming pool installations.